EA8000 X-Ray Particle Contaminant Analyzer

Rapid Detection and Elemental Identification of Metal Particle Contamination

Tabs

Overview

Call 800-548-9001 for more information or for details on how to purchase

The Hitachi EA8000 X-Ray Particle Contaminant Analyzer enables rapid detection and elemental identification of metal particles approximately 20um in diameter found in the electrode plates of fuel cells and lithium ion rechargeable batteries.  Metal particle contamination in electrode materials, separators of fuel cells, and lithium ion rechargeable batteries can cause heat and fire or decrease battery capacity and lifetime.  When the measurement parameters are set, the EA8000 automatically captures X-ray images, detects, and identifies metal particles, enhancing the efficiency of failure analysis and testing.
 

1. 20um Particles Detected in Samples 250x200mm in Just a Few Minutes

Conventional X-ray CT systems require about 10 hours to detect metal particles 20um in diameter in battery electrode plates 250x200mm (about B4-size). Hitachi High-Tech Science developed a new particle inspection technology, in combination with the X-ray transmission method, resulting in greatly reduced imaging time. Detection time can be reduced to 3 to 10 minutes, more than 100 times shorter than conventional times. 

2. Automatic Particle Detection by Image Processing

EA8000 conducts high-speed image processing and detects particle position automatically over the entire 250mm x 200mm area using X-Ray image capture.

3. Automatic Elemental Identification of the Detected Particle

Fluorescent X-ray mapping at the particle location and automatic elemental identification can be performed.

4. Identification of Metal Particles in Battery Electrode plates

Conventional instruments are only able to identify metal particles 20um in diameter when the particles are on the surface of the electrode plates. Signals from embedded metal particles are very small due to the absorption by the surrounding sample material. The EA8000 VX uses unique, focused X-ray optics to identify the elements in metal particles deeper within electrode plates and organic films.

5. All-in-one Instrument for Higher Efficiency

Detection speed and metal contaminant identification can be done in a much shorter time than with conventional instruments. An X-ray imaging unit, fluorescent X-ray analyzer, and optical microscope are integrated into one system and linked to provide results automatically. The operator can simply place a sample and make measurements, resulting in efficient work and high throughput.